Commit | Line | Data |
---|---|---|
38cbb20a FB |
1 | # Doxyfile 1.7.1 |
2 | ||
3 | # This file describes the settings to be used by the documentation system | |
4 | # doxygen (www.doxygen.org) for a project | |
5 | # | |
6 | # All text after a hash (#) is considered a comment and will be ignored | |
7 | # The format is: | |
8 | # TAG = value [value, ...] | |
9 | # For lists items can also be appended using: | |
10 | # TAG += value [value, ...] | |
11 | # Values that contain spaces should be placed between quotes (" ") | |
12 | ||
13 | #--------------------------------------------------------------------------- | |
14 | # Project related configuration options | |
15 | #--------------------------------------------------------------------------- | |
16 | ||
17 | # This tag specifies the encoding used for all characters in the config file | |
18 | # that follow. The default is UTF-8 which is also the encoding used for all | |
19 | # text before the first occurrence of this tag. Doxygen uses libiconv (or the | |
20 | # iconv built into libc) for the transcoding. See | |
21 | # http://www.gnu.org/software/libiconv for the list of possible encodings. | |
22 | ||
23 | DOXYFILE_ENCODING = UTF-8 | |
24 | ||
25 | # The PROJECT_NAME tag is a single word (or a sequence of words surrounded | |
26 | # by quotes) that should identify the project. | |
27 | ||
28 | PROJECT_NAME = Plat/al | |
29 | ||
30 | # The PROJECT_NUMBER tag can be used to enter a project or revision number. | |
31 | # This could be handy for archiving the generated documentation or | |
32 | # if some version control system is used. | |
33 | ||
34 | PROJECT_NUMBER = devel | |
35 | ||
36 | # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) | |
37 | # base path where the generated documentation will be put. | |
38 | # If a relative path is entered, it will be relative to the location | |
39 | # where doxygen was started. If left blank the current directory will be used. | |
40 | ||
41 | OUTPUT_DIRECTORY = | |
42 | ||
43 | # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create | |
44 | # 4096 sub-directories (in 2 levels) under the output directory of each output | |
45 | # format and will distribute the generated files over these directories. | |
46 | # Enabling this option can be useful when feeding doxygen a huge amount of | |
47 | # source files, where putting all generated files in the same directory would | |
48 | # otherwise cause performance problems for the file system. | |
49 | ||
50 | CREATE_SUBDIRS = NO | |
51 | ||
52 | # The OUTPUT_LANGUAGE tag is used to specify the language in which all | |
53 | # documentation generated by doxygen is written. Doxygen will use this | |
54 | # information to generate all constant output in the proper language. | |
55 | # The default language is English, other supported languages are: | |
56 | # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, | |
57 | # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, | |
58 | # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English | |
59 | # messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, | |
60 | # Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, | |
61 | # Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. | |
62 | ||
63 | OUTPUT_LANGUAGE = English | |
64 | ||
65 | # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will | |
66 | # include brief member descriptions after the members that are listed in | |
67 | # the file and class documentation (similar to JavaDoc). | |
68 | # Set to NO to disable this. | |
69 | ||
70 | BRIEF_MEMBER_DESC = YES | |
71 | ||
72 | # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend | |
73 | # the brief description of a member or function before the detailed description. | |
74 | # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the | |
75 | # brief descriptions will be completely suppressed. | |
76 | ||
77 | REPEAT_BRIEF = YES | |
78 | ||
79 | # This tag implements a quasi-intelligent brief description abbreviator | |
80 | # that is used to form the text in various listings. Each string | |
81 | # in this list, if found as the leading text of the brief description, will be | |
82 | # stripped from the text and the result after processing the whole list, is | |
83 | # used as the annotated text. Otherwise, the brief description is used as-is. | |
84 | # If left blank, the following values are used ("$name" is automatically | |
85 | # replaced with the name of the entity): "The $name class" "The $name widget" | |
86 | # "The $name file" "is" "provides" "specifies" "contains" | |
87 | # "represents" "a" "an" "the" | |
88 | ||
89 | ABBREVIATE_BRIEF = | |
90 | ||
91 | # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then | |
92 | # Doxygen will generate a detailed section even if there is only a brief | |
93 | # description. | |
94 | ||
95 | ALWAYS_DETAILED_SEC = NO | |
96 | ||
97 | # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all | |
98 | # inherited members of a class in the documentation of that class as if those | |
99 | # members were ordinary class members. Constructors, destructors and assignment | |
100 | # operators of the base classes will not be shown. | |
101 | ||
102 | INLINE_INHERITED_MEMB = NO | |
103 | ||
104 | # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full | |
105 | # path before files name in the file list and in the header files. If set | |
106 | # to NO the shortest path that makes the file name unique will be used. | |
107 | ||
108 | FULL_PATH_NAMES = NO | |
109 | ||
110 | # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag | |
111 | # can be used to strip a user-defined part of the path. Stripping is | |
112 | # only done if one of the specified strings matches the left-hand part of | |
113 | # the path. The tag can be used to show relative paths in the file list. | |
114 | # If left blank the directory from which doxygen is run is used as the | |
115 | # path to strip. | |
116 | ||
117 | STRIP_FROM_PATH = | |
118 | ||
119 | # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of | |
120 | # the path mentioned in the documentation of a class, which tells | |
121 | # the reader which header file to include in order to use a class. | |
122 | # If left blank only the name of the header file containing the class | |
123 | # definition is used. Otherwise one should specify the include paths that | |
124 | # are normally passed to the compiler using the -I flag. | |
125 | ||
126 | STRIP_FROM_INC_PATH = | |
127 | ||
128 | # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter | |
129 | # (but less readable) file names. This can be useful is your file systems | |
130 | # doesn't support long names like on DOS, Mac, or CD-ROM. | |
131 | ||
132 | SHORT_NAMES = NO | |
133 | ||
134 | # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen | |
135 | # will interpret the first line (until the first dot) of a JavaDoc-style | |
136 | # comment as the brief description. If set to NO, the JavaDoc | |
137 | # comments will behave just like regular Qt-style comments | |
138 | # (thus requiring an explicit @brief command for a brief description.) | |
139 | ||
140 | JAVADOC_AUTOBRIEF = YES | |
141 | ||
142 | # If the QT_AUTOBRIEF tag is set to YES then Doxygen will | |
143 | # interpret the first line (until the first dot) of a Qt-style | |
144 | # comment as the brief description. If set to NO, the comments | |
145 | # will behave just like regular Qt-style comments (thus requiring | |
146 | # an explicit \brief command for a brief description.) | |
147 | ||
148 | QT_AUTOBRIEF = NO | |
149 | ||
150 | # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen | |
151 | # treat a multi-line C++ special comment block (i.e. a block of //! or /// | |
152 | # comments) as a brief description. This used to be the default behaviour. | |
153 | # The new default is to treat a multi-line C++ comment block as a detailed | |
154 | # description. Set this tag to YES if you prefer the old behaviour instead. | |
155 | ||
156 | MULTILINE_CPP_IS_BRIEF = NO | |
157 | ||
158 | # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented | |
159 | # member inherits the documentation from any documented member that it | |
160 | # re-implements. | |
161 | ||
162 | INHERIT_DOCS = YES | |
163 | ||
164 | # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce | |
165 | # a new page for each member. If set to NO, the documentation of a member will | |
166 | # be part of the file/class/namespace that contains it. | |
167 | ||
168 | SEPARATE_MEMBER_PAGES = NO | |
169 | ||
170 | # The TAB_SIZE tag can be used to set the number of spaces in a tab. | |
171 | # Doxygen uses this value to replace tabs by spaces in code fragments. | |
172 | ||
173 | TAB_SIZE = 4 | |
174 | ||
175 | # This tag can be used to specify a number of aliases that acts | |
176 | # as commands in the documentation. An alias has the form "name=value". | |
177 | # For example adding "sideeffect=\par Side Effects:\n" will allow you to | |
178 | # put the command \sideeffect (or @sideeffect) in the documentation, which | |
179 | # will result in a user-defined paragraph with heading "Side Effects:". | |
180 | # You can put \n's in the value part of an alias to insert newlines. | |
181 | ||
182 | ALIASES = | |
183 | ||
184 | # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C | |
185 | # sources only. Doxygen will then generate output that is more tailored for C. | |
186 | # For instance, some of the names that are used will be different. The list | |
187 | # of all members will be omitted, etc. | |
188 | ||
189 | OPTIMIZE_OUTPUT_FOR_C = YES | |
190 | ||
191 | # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java | |
192 | # sources only. Doxygen will then generate output that is more tailored for | |
193 | # Java. For instance, namespaces will be presented as packages, qualified | |
194 | # scopes will look different, etc. | |
195 | ||
196 | OPTIMIZE_OUTPUT_JAVA = NO | |
197 | ||
198 | # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran | |
199 | # sources only. Doxygen will then generate output that is more tailored for | |
200 | # Fortran. | |
201 | ||
202 | OPTIMIZE_FOR_FORTRAN = NO | |
203 | ||
204 | # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL | |
205 | # sources. Doxygen will then generate output that is tailored for | |
206 | # VHDL. | |
207 | ||
208 | OPTIMIZE_OUTPUT_VHDL = NO | |
209 | ||
210 | # Doxygen selects the parser to use depending on the extension of the files it | |
211 | # parses. With this tag you can assign which parser to use for a given extension. | |
212 | # Doxygen has a built-in mapping, but you can override or extend it using this | |
213 | # tag. The format is ext=language, where ext is a file extension, and language | |
214 | # is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, | |
215 | # C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make | |
216 | # doxygen treat .inc files as Fortran files (default is PHP), and .f files as C | |
217 | # (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions | |
218 | # you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. | |
219 | ||
220 | EXTENSION_MAPPING = | |
221 | ||
222 | # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want | |
223 | # to include (a tag file for) the STL sources as input, then you should | |
224 | # set this tag to YES in order to let doxygen match functions declarations and | |
225 | # definitions whose arguments contain STL classes (e.g. func(std::string); v.s. | |
226 | # func(std::string) {}). This also make the inheritance and collaboration | |
227 | # diagrams that involve STL classes more complete and accurate. | |
228 | ||
229 | BUILTIN_STL_SUPPORT = NO | |
230 | ||
231 | # If you use Microsoft's C++/CLI language, you should set this option to YES to | |
232 | # enable parsing support. | |
233 | ||
234 | CPP_CLI_SUPPORT = NO | |
235 | ||
236 | # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. | |
237 | # Doxygen will parse them like normal C++ but will assume all classes use public | |
238 | # instead of private inheritance when no explicit protection keyword is present. | |
239 | ||
240 | SIP_SUPPORT = NO | |
241 | ||
242 | # For Microsoft's IDL there are propget and propput attributes to indicate getter | |
243 | # and setter methods for a property. Setting this option to YES (the default) | |
244 | # will make doxygen to replace the get and set methods by a property in the | |
245 | # documentation. This will only work if the methods are indeed getting or | |
246 | # setting a simple type. If this is not the case, or you want to show the | |
247 | # methods anyway, you should set this option to NO. | |
248 | ||
249 | IDL_PROPERTY_SUPPORT = YES | |
250 | ||
251 | # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC | |
252 | # tag is set to YES, then doxygen will reuse the documentation of the first | |
253 | # member in the group (if any) for the other members of the group. By default | |
254 | # all members of a group must be documented explicitly. | |
255 | ||
256 | DISTRIBUTE_GROUP_DOC = NO | |
257 | ||
258 | # Set the SUBGROUPING tag to YES (the default) to allow class member groups of | |
259 | # the same type (for instance a group of public functions) to be put as a | |
260 | # subgroup of that type (e.g. under the Public Functions section). Set it to | |
261 | # NO to prevent subgrouping. Alternatively, this can be done per class using | |
262 | # the \nosubgrouping command. | |
263 | ||
264 | SUBGROUPING = YES | |
265 | ||
266 | # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum | |
267 | # is documented as struct, union, or enum with the name of the typedef. So | |
268 | # typedef struct TypeS {} TypeT, will appear in the documentation as a struct | |
269 | # with name TypeT. When disabled the typedef will appear as a member of a file, | |
270 | # namespace, or class. And the struct will be named TypeS. This can typically | |
271 | # be useful for C code in case the coding convention dictates that all compound | |
272 | # types are typedef'ed and only the typedef is referenced, never the tag name. | |
273 | ||
274 | TYPEDEF_HIDES_STRUCT = YES | |
275 | ||
276 | # The SYMBOL_CACHE_SIZE determines the size of the internal cache use to | |
277 | # determine which symbols to keep in memory and which to flush to disk. | |
278 | # When the cache is full, less often used symbols will be written to disk. | |
279 | # For small to medium size projects (<1000 input files) the default value is | |
280 | # probably good enough. For larger projects a too small cache size can cause | |
281 | # doxygen to be busy swapping symbols to and from disk most of the time | |
282 | # causing a significant performance penality. | |
283 | # If the system has enough physical memory increasing the cache will improve the | |
284 | # performance by keeping more symbols in memory. Note that the value works on | |
285 | # a logarithmic scale so increasing the size by one will rougly double the | |
286 | # memory usage. The cache size is given by this formula: | |
287 | # 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, | |
288 | # corresponding to a cache size of 2^16 = 65536 symbols | |
289 | ||
290 | SYMBOL_CACHE_SIZE = 0 | |
291 | ||
292 | #--------------------------------------------------------------------------- | |
293 | # Build related configuration options | |
294 | #--------------------------------------------------------------------------- | |
295 | ||
296 | # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in | |
297 | # documentation are documented, even if no documentation was available. | |
298 | # Private class members and static file members will be hidden unless | |
299 | # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES | |
300 | ||
301 | EXTRACT_ALL = NO | |
302 | ||
303 | # If the EXTRACT_PRIVATE tag is set to YES all private members of a class | |
304 | # will be included in the documentation. | |
305 | ||
306 | EXTRACT_PRIVATE = YES | |
307 | ||
308 | # If the EXTRACT_STATIC tag is set to YES all static members of a file | |
309 | # will be included in the documentation. | |
310 | ||
311 | EXTRACT_STATIC = YES | |
312 | ||
313 | # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) | |
314 | # defined locally in source files will be included in the documentation. | |
315 | # If set to NO only classes defined in header files are included. | |
316 | ||
317 | EXTRACT_LOCAL_CLASSES = YES | |
318 | ||
319 | # This flag is only useful for Objective-C code. When set to YES local | |
320 | # methods, which are defined in the implementation section but not in | |
321 | # the interface are included in the documentation. | |
322 | # If set to NO (the default) only methods in the interface are included. | |
323 | ||
324 | EXTRACT_LOCAL_METHODS = NO | |
325 | ||
326 | # If this flag is set to YES, the members of anonymous namespaces will be | |
327 | # extracted and appear in the documentation as a namespace called | |
328 | # 'anonymous_namespace{file}', where file will be replaced with the base | |
329 | # name of the file that contains the anonymous namespace. By default | |
330 | # anonymous namespace are hidden. | |
331 | ||
332 | EXTRACT_ANON_NSPACES = NO | |
333 | ||
334 | # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all | |
335 | # undocumented members of documented classes, files or namespaces. | |
336 | # If set to NO (the default) these members will be included in the | |
337 | # various overviews, but no documentation section is generated. | |
338 | # This option has no effect if EXTRACT_ALL is enabled. | |
339 | ||
340 | HIDE_UNDOC_MEMBERS = NO | |
341 | ||
342 | # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all | |
343 | # undocumented classes that are normally visible in the class hierarchy. | |
344 | # If set to NO (the default) these classes will be included in the various | |
345 | # overviews. This option has no effect if EXTRACT_ALL is enabled. | |
346 | ||
347 | HIDE_UNDOC_CLASSES = NO | |
348 | ||
349 | # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all | |
350 | # friend (class|struct|union) declarations. | |
351 | # If set to NO (the default) these declarations will be included in the | |
352 | # documentation. | |
353 | ||
354 | HIDE_FRIEND_COMPOUNDS = NO | |
355 | ||
356 | # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any | |
357 | # documentation blocks found inside the body of a function. | |
358 | # If set to NO (the default) these blocks will be appended to the | |
359 | # function's detailed documentation block. | |
360 | ||
361 | HIDE_IN_BODY_DOCS = NO | |
362 | ||
363 | # The INTERNAL_DOCS tag determines if documentation | |
364 | # that is typed after a \internal command is included. If the tag is set | |
365 | # to NO (the default) then the documentation will be excluded. | |
366 | # Set it to YES to include the internal documentation. | |
367 | ||
368 | INTERNAL_DOCS = YES | |
369 | ||
370 | # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate | |
371 | # file names in lower-case letters. If set to YES upper-case letters are also | |
372 | # allowed. This is useful if you have classes or files whose names only differ | |
373 | # in case and if your file system supports case sensitive file names. Windows | |
374 | # and Mac users are advised to set this option to NO. | |
375 | ||
376 | CASE_SENSE_NAMES = NO | |
377 | ||
378 | # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen | |
379 | # will show members with their full class and namespace scopes in the | |
380 | # documentation. If set to YES the scope will be hidden. | |
381 | ||
382 | HIDE_SCOPE_NAMES = NO | |
383 | ||
384 | # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen | |
385 | # will put a list of the files that are included by a file in the documentation | |
386 | # of that file. | |
387 | ||
388 | SHOW_INCLUDE_FILES = NO | |
389 | ||
390 | # If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen | |
391 | # will list include files with double quotes in the documentation | |
392 | # rather than with sharp brackets. | |
393 | ||
394 | FORCE_LOCAL_INCLUDES = NO | |
395 | ||
396 | # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] | |
397 | # is inserted in the documentation for inline members. | |
398 | ||
399 | INLINE_INFO = YES | |
400 | ||
401 | # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen | |
402 | # will sort the (detailed) documentation of file and class members | |
403 | # alphabetically by member name. If set to NO the members will appear in | |
404 | # declaration order. | |
405 | ||
406 | SORT_MEMBER_DOCS = NO | |
407 | ||
408 | # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the | |
409 | # brief documentation of file, namespace and class members alphabetically | |
410 | # by member name. If set to NO (the default) the members will appear in | |
411 | # declaration order. | |
412 | ||
413 | SORT_BRIEF_DOCS = NO | |
414 | ||
415 | # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen | |
416 | # will sort the (brief and detailed) documentation of class members so that | |
417 | # constructors and destructors are listed first. If set to NO (the default) | |
418 | # the constructors will appear in the respective orders defined by | |
419 | # SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. | |
420 | # This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO | |
421 | # and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. | |
422 | ||
423 | SORT_MEMBERS_CTORS_1ST = NO | |
424 | ||
425 | # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the | |
426 | # hierarchy of group names into alphabetical order. If set to NO (the default) | |
427 | # the group names will appear in their defined order. | |
428 | ||
429 | SORT_GROUP_NAMES = NO | |
430 | ||
431 | # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be | |
432 | # sorted by fully-qualified names, including namespaces. If set to | |
433 | # NO (the default), the class list will be sorted only by class name, | |
434 | # not including the namespace part. | |
435 | # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. | |
436 | # Note: This option applies only to the class list, not to the | |
437 | # alphabetical list. | |
438 | ||
439 | SORT_BY_SCOPE_NAME = NO | |
440 | ||
441 | # The GENERATE_TODOLIST tag can be used to enable (YES) or | |
442 | # disable (NO) the todo list. This list is created by putting \todo | |
443 | # commands in the documentation. | |
444 | ||
445 | GENERATE_TODOLIST = YES | |
446 | ||
447 | # The GENERATE_TESTLIST tag can be used to enable (YES) or | |
448 | # disable (NO) the test list. This list is created by putting \test | |
449 | # commands in the documentation. | |
450 | ||
451 | GENERATE_TESTLIST = NO | |
452 | ||
453 | # The GENERATE_BUGLIST tag can be used to enable (YES) or | |
454 | # disable (NO) the bug list. This list is created by putting \bug | |
455 | # commands in the documentation. | |
456 | ||
457 | GENERATE_BUGLIST = YES | |
458 | ||
459 | # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or | |
460 | # disable (NO) the deprecated list. This list is created by putting | |
461 | # \deprecated commands in the documentation. | |
462 | ||
463 | GENERATE_DEPRECATEDLIST= YES | |
464 | ||
465 | # The ENABLED_SECTIONS tag can be used to enable conditional | |
466 | # documentation sections, marked by \if sectionname ... \endif. | |
467 | ||
468 | ENABLED_SECTIONS = | |
469 | ||
470 | # The MAX_INITIALIZER_LINES tag determines the maximum number of lines | |
471 | # the initial value of a variable or define consists of for it to appear in | |
472 | # the documentation. If the initializer consists of more lines than specified | |
473 | # here it will be hidden. Use a value of 0 to hide initializers completely. | |
474 | # The appearance of the initializer of individual variables and defines in the | |
475 | # documentation can be controlled using \showinitializer or \hideinitializer | |
476 | # command in the documentation regardless of this setting. | |
477 | ||
478 | MAX_INITIALIZER_LINES = 30 | |
479 | ||
480 | # Set the SHOW_USED_FILES tag to NO to disable the list of files generated | |
481 | # at the bottom of the documentation of classes and structs. If set to YES the | |
482 | # list will mention the files that were used to generate the documentation. | |
483 | ||
484 | SHOW_USED_FILES = YES | |
485 | ||
486 | # If the sources in your project are distributed over multiple directories | |
487 | # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy | |
488 | # in the documentation. The default is NO. | |
489 | ||
490 | SHOW_DIRECTORIES = NO | |
491 | ||
492 | # Set the SHOW_FILES tag to NO to disable the generation of the Files page. | |
493 | # This will remove the Files entry from the Quick Index and from the | |
494 | # Folder Tree View (if specified). The default is YES. | |
495 | ||
496 | SHOW_FILES = YES | |
497 | ||
498 | # Set the SHOW_NAMESPACES tag to NO to disable the generation of the | |
499 | # Namespaces page. | |
500 | # This will remove the Namespaces entry from the Quick Index | |
501 | # and from the Folder Tree View (if specified). The default is YES. | |
502 | ||
503 | SHOW_NAMESPACES = YES | |
504 | ||
505 | # The FILE_VERSION_FILTER tag can be used to specify a program or script that | |
506 | # doxygen should invoke to get the current version for each file (typically from | |
507 | # the version control system). Doxygen will invoke the program by executing (via | |
508 | # popen()) the command <command> <input-file>, where <command> is the value of | |
509 | # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file | |
510 | # provided by doxygen. Whatever the program writes to standard output | |
511 | # is used as the file version. See the manual for examples. | |
512 | ||
513 | FILE_VERSION_FILTER = | |
514 | ||
515 | # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed | |
516 | # by doxygen. The layout file controls the global structure of the generated | |
517 | # output files in an output format independent way. The create the layout file | |
518 | # that represents doxygen's defaults, run doxygen with the -l option. | |
519 | # You can optionally specify a file name after the option, if omitted | |
520 | # DoxygenLayout.xml will be used as the name of the layout file. | |
521 | ||
522 | LAYOUT_FILE = | |
523 | ||
524 | #--------------------------------------------------------------------------- | |
525 | # configuration options related to warning and progress messages | |
526 | #--------------------------------------------------------------------------- | |
527 | ||
528 | # The QUIET tag can be used to turn on/off the messages that are generated | |
529 | # by doxygen. Possible values are YES and NO. If left blank NO is used. | |
530 | ||
531 | QUIET = YES | |
532 | ||
533 | # The WARNINGS tag can be used to turn on/off the warning messages that are | |
534 | # generated by doxygen. Possible values are YES and NO. If left blank | |
535 | # NO is used. | |
536 | ||
537 | WARNINGS = YES | |
538 | ||
539 | # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings | |
540 | # for undocumented members. If EXTRACT_ALL is set to YES then this flag will | |
541 | # automatically be disabled. | |
542 | ||
543 | WARN_IF_UNDOCUMENTED = NO | |
544 | ||
545 | # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for | |
546 | # potential errors in the documentation, such as not documenting some | |
547 | # parameters in a documented function, or documenting parameters that | |
548 | # don't exist or using markup commands wrongly. | |
549 | ||
550 | WARN_IF_DOC_ERROR = YES | |
551 | ||
552 | # This WARN_NO_PARAMDOC option can be abled to get warnings for | |
553 | # functions that are documented, but have no documentation for their parameters | |
554 | # or return value. If set to NO (the default) doxygen will only warn about | |
555 | # wrong or incomplete parameter documentation, but not about the absence of | |
556 | # documentation. | |
557 | ||
558 | WARN_NO_PARAMDOC = NO | |
559 | ||
560 | # The WARN_FORMAT tag determines the format of the warning messages that | |
561 | # doxygen can produce. The string should contain the $file, $line, and $text | |
562 | # tags, which will be replaced by the file and line number from which the | |
563 | # warning originated and the warning text. Optionally the format may contain | |
564 | # $version, which will be replaced by the version of the file (if it could | |
565 | # be obtained via FILE_VERSION_FILTER) | |
566 | ||
567 | WARN_FORMAT = "$file:$line: $text" | |
568 | ||
569 | # The WARN_LOGFILE tag can be used to specify a file to which warning | |
570 | # and error messages should be written. If left blank the output is written | |
571 | # to stderr. | |
572 | ||
573 | WARN_LOGFILE = | |
574 | ||
575 | #--------------------------------------------------------------------------- | |
576 | # configuration options related to the input files | |
577 | #--------------------------------------------------------------------------- | |
578 | ||
579 | # The INPUT tag can be used to specify the files and/or directories that contain | |
580 | # documented source files. You may enter file names like "myfile.cpp" or | |
581 | # directories like "/usr/src/myproject". Separate the files or directories | |
582 | # with spaces. | |
583 | ||
584 | INPUT = . | |
585 | ||
586 | # This tag can be used to specify the character encoding of the source files | |
587 | # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is | |
588 | # also the default input encoding. Doxygen uses libiconv (or the iconv built | |
589 | # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for | |
590 | # the list of possible encodings. | |
591 | ||
592 | INPUT_ENCODING = UTF-8 | |
593 | ||
594 | # If the value of the INPUT tag contains directories, you can use the | |
595 | # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp | |
596 | # and *.h) to filter out the source-files in the directories. If left | |
597 | # blank the following patterns are tested: | |
598 | # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx | |
599 | # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 | |
600 | ||
601 | FILE_PATTERNS = *.php \ | |
602 | *.js \ | |
603 | *.dox | |
604 | ||
605 | # The RECURSIVE tag can be used to turn specify whether or not subdirectories | |
606 | # should be searched for input files as well. Possible values are YES and NO. | |
607 | # If left blank NO is used. | |
608 | ||
609 | RECURSIVE = YES | |
610 | ||
611 | # The EXCLUDE tag can be used to specify files and/or directories that should | |
612 | # excluded from the INPUT source files. This way you can easily exclude a | |
613 | # subdirectory from a directory tree whose root is specified with the INPUT tag. | |
614 | ||
615 | EXCLUDE = | |
616 | ||
617 | # The EXCLUDE_SYMLINKS tag can be used select whether or not files or | |
618 | # directories that are symbolic links (a Unix filesystem feature) are excluded | |
619 | # from the input. | |
620 | ||
621 | EXCLUDE_SYMLINKS = YES | |
622 | ||
623 | # If the value of the INPUT tag contains directories, you can use the | |
624 | # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude | |
625 | # certain files from those directories. Note that the wildcards are matched | |
626 | # against the file with absolute path, so to exclude all test directories | |
627 | # for example use the pattern */test/* | |
628 | ||
629 | EXCLUDE_PATTERNS = | |
630 | ||
631 | # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names | |
632 | # (namespaces, classes, functions, etc.) that should be excluded from the | |
633 | # output. The symbol name can be a fully qualified name, a word, or if the | |
634 | # wildcard * is used, a substring. Examples: ANamespace, AClass, | |
635 | # AClass::ANamespace, ANamespace::*Test | |
636 | ||
637 | EXCLUDE_SYMBOLS = | |
638 | ||
639 | # The EXAMPLE_PATH tag can be used to specify one or more files or | |
640 | # directories that contain example code fragments that are included (see | |
641 | # the \include command). | |
642 | ||
643 | EXAMPLE_PATH = | |
644 | ||
645 | # If the value of the EXAMPLE_PATH tag contains directories, you can use the | |
646 | # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp | |
647 | # and *.h) to filter out the source-files in the directories. If left | |
648 | # blank all files are included. | |
649 | ||
650 | EXAMPLE_PATTERNS = | |
651 | ||
652 | # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be | |
653 | # searched for input files to be used with the \include or \dontinclude | |
654 | # commands irrespective of the value of the RECURSIVE tag. | |
655 | # Possible values are YES and NO. If left blank NO is used. | |
656 | ||
657 | EXAMPLE_RECURSIVE = NO | |
658 | ||
659 | # The IMAGE_PATH tag can be used to specify one or more files or | |
660 | # directories that contain image that are included in the documentation (see | |
661 | # the \image command). | |
662 | ||
663 | IMAGE_PATH = | |
664 | ||
665 | # The INPUT_FILTER tag can be used to specify a program that doxygen should | |
666 | # invoke to filter for each input file. Doxygen will invoke the filter program | |
667 | # by executing (via popen()) the command <filter> <input-file>, where <filter> | |
668 | # is the value of the INPUT_FILTER tag, and <input-file> is the name of an | |
669 | # input file. Doxygen will then use the output that the filter program writes | |
670 | # to standard output. | |
671 | # If FILTER_PATTERNS is specified, this tag will be | |
672 | # ignored. | |
673 | ||
674 | INPUT_FILTER = | |
675 | ||
676 | # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern | |
677 | # basis. | |
678 | # Doxygen will compare the file name with each pattern and apply the | |
679 | # filter if there is a match. | |
680 | # The filters are a list of the form: | |
681 | # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further | |
682 | # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER | |
683 | # is applied to all files. | |
684 | ||
685 | FILTER_PATTERNS = | |
686 | ||
687 | # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using | |
688 | # INPUT_FILTER) will be used to filter the input files when producing source | |
689 | # files to browse (i.e. when SOURCE_BROWSER is set to YES). | |
690 | ||
691 | FILTER_SOURCE_FILES = NO | |
692 | ||
693 | #--------------------------------------------------------------------------- | |
694 | # configuration options related to source browsing | |
695 | #--------------------------------------------------------------------------- | |
696 | ||
697 | # If the SOURCE_BROWSER tag is set to YES then a list of source files will | |
698 | # be generated. Documented entities will be cross-referenced with these sources. | |
699 | # Note: To get rid of all source code in the generated output, make sure also | |
700 | # VERBATIM_HEADERS is set to NO. | |
701 | ||
702 | SOURCE_BROWSER = YES | |
703 | ||
704 | # Setting the INLINE_SOURCES tag to YES will include the body | |
705 | # of functions and classes directly in the documentation. | |
706 | ||
707 | INLINE_SOURCES = NO | |
708 | ||
709 | # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct | |
710 | # doxygen to hide any special comment blocks from generated source code | |
711 | # fragments. Normal C and C++ comments will always remain visible. | |
712 | ||
713 | STRIP_CODE_COMMENTS = YES | |
714 | ||
715 | # If the REFERENCED_BY_RELATION tag is set to YES | |
716 | # then for each documented function all documented | |
717 | # functions referencing it will be listed. | |
718 | ||
719 | REFERENCED_BY_RELATION = NO | |
720 | ||
721 | # If the REFERENCES_RELATION tag is set to YES | |
722 | # then for each documented function all documented entities | |
723 | # called/used by that function will be listed. | |
724 | ||
725 | REFERENCES_RELATION = YES | |
726 | ||
727 | # If the REFERENCES_LINK_SOURCE tag is set to YES (the default) | |
728 | # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from | |
729 | # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will | |
730 | # link to the source code. | |
731 | # Otherwise they will link to the documentation. | |
732 | ||
733 | REFERENCES_LINK_SOURCE = YES | |
734 | ||
735 | # If the USE_HTAGS tag is set to YES then the references to source code | |
736 | # will point to the HTML generated by the htags(1) tool instead of doxygen | |
737 | # built-in source browser. The htags tool is part of GNU's global source | |
738 | # tagging system (see http://www.gnu.org/software/global/global.html). You | |
739 | # will need version 4.8.6 or higher. | |
740 | ||
741 | USE_HTAGS = NO | |
742 | ||
743 | # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen | |
744 | # will generate a verbatim copy of the header file for each class for | |
745 | # which an include is specified. Set to NO to disable this. | |
746 | ||
747 | VERBATIM_HEADERS = YES | |
748 | ||
749 | #--------------------------------------------------------------------------- | |
750 | # configuration options related to the alphabetical class index | |
751 | #--------------------------------------------------------------------------- | |
752 | ||
753 | # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index | |
754 | # of all compounds will be generated. Enable this if the project | |
755 | # contains a lot of classes, structs, unions or interfaces. | |
756 | ||
757 | ALPHABETICAL_INDEX = YES | |
758 | ||
759 | # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then | |
760 | # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns | |
761 | # in which this list will be split (can be a number in the range [1..20]) | |
762 | ||
763 | COLS_IN_ALPHA_INDEX = 5 | |
764 | ||
765 | # In case all classes in a project start with a common prefix, all | |
766 | # classes will be put under the same header in the alphabetical index. | |
767 | # The IGNORE_PREFIX tag can be used to specify one or more prefixes that | |
768 | # should be ignored while generating the index headers. | |
769 | ||
770 | IGNORE_PREFIX = | |
771 | ||
772 | #--------------------------------------------------------------------------- | |
773 | # configuration options related to the HTML output | |
774 | #--------------------------------------------------------------------------- | |
775 | ||
776 | # If the GENERATE_HTML tag is set to YES (the default) Doxygen will | |
777 | # generate HTML output. | |
778 | ||
779 | GENERATE_HTML = YES | |
780 | ||
781 | # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. | |
782 | # If a relative path is entered the value of OUTPUT_DIRECTORY will be | |
783 | # put in front of it. If left blank `html' will be used as the default path. | |
784 | ||
785 | HTML_OUTPUT = doc/html | |
786 | ||
787 | # The HTML_FILE_EXTENSION tag can be used to specify the file extension for | |
788 | # each generated HTML page (for example: .htm,.php,.asp). If it is left blank | |
789 | # doxygen will generate files with .html extension. | |
790 | ||
791 | HTML_FILE_EXTENSION = .html | |
792 | ||
793 | # The HTML_HEADER tag can be used to specify a personal HTML header for | |
794 | # each generated HTML page. If it is left blank doxygen will generate a | |
795 | # standard header. | |
796 | ||
797 | HTML_HEADER = | |
798 | ||
799 | # The HTML_FOOTER tag can be used to specify a personal HTML footer for | |
800 | # each generated HTML page. If it is left blank doxygen will generate a | |
801 | # standard footer. | |
802 | ||
803 | HTML_FOOTER = | |
804 | ||
805 | # The HTML_STYLESHEET tag can be used to specify a user-defined cascading | |
806 | # style sheet that is used by each HTML page. It can be used to | |
807 | # fine-tune the look of the HTML output. If the tag is left blank doxygen | |
808 | # will generate a default style sheet. Note that doxygen will try to copy | |
809 | # the style sheet file to the HTML output directory, so don't put your own | |
810 | # stylesheet in the HTML output directory as well, or it will be erased! | |
811 | ||
812 | HTML_STYLESHEET = | |
813 | ||
814 | # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. | |
815 | # Doxygen will adjust the colors in the stylesheet and background images | |
816 | # according to this color. Hue is specified as an angle on a colorwheel, | |
817 | # see http://en.wikipedia.org/wiki/Hue for more information. | |
818 | # For instance the value 0 represents red, 60 is yellow, 120 is green, | |
819 | # 180 is cyan, 240 is blue, 300 purple, and 360 is red again. | |
820 | # The allowed range is 0 to 359. | |
821 | ||
822 | HTML_COLORSTYLE_HUE = 220 | |
823 | ||
824 | # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of | |
825 | # the colors in the HTML output. For a value of 0 the output will use | |
826 | # grayscales only. A value of 255 will produce the most vivid colors. | |
827 | ||
828 | HTML_COLORSTYLE_SAT = 100 | |
829 | ||
830 | # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to | |
831 | # the luminance component of the colors in the HTML output. Values below | |
832 | # 100 gradually make the output lighter, whereas values above 100 make | |
833 | # the output darker. The value divided by 100 is the actual gamma applied, | |
834 | # so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, | |
835 | # and 100 does not change the gamma. | |
836 | ||
837 | HTML_COLORSTYLE_GAMMA = 80 | |
838 | ||
839 | # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML | |
840 | # page will contain the date and time when the page was generated. Setting | |
841 | # this to NO can help when comparing the output of multiple runs. | |
842 | ||
843 | HTML_TIMESTAMP = YES | |
844 | ||
845 | # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, | |
846 | # files or namespaces will be aligned in HTML using tables. If set to | |
847 | # NO a bullet list will be used. | |
848 | ||
849 | HTML_ALIGN_MEMBERS = YES | |
850 | ||
851 | # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML | |
852 | # documentation will contain sections that can be hidden and shown after the | |
853 | # page has loaded. For this to work a browser that supports | |
854 | # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox | |
855 | # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). | |
856 | ||
857 | HTML_DYNAMIC_SECTIONS = NO | |
858 | ||
859 | # If the GENERATE_DOCSET tag is set to YES, additional index files | |
860 | # will be generated that can be used as input for Apple's Xcode 3 | |
861 | # integrated development environment, introduced with OSX 10.5 (Leopard). | |
862 | # To create a documentation set, doxygen will generate a Makefile in the | |
863 | # HTML output directory. Running make will produce the docset in that | |
864 | # directory and running "make install" will install the docset in | |
865 | # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find | |
866 | # it at startup. | |
867 | # See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html | |
868 | # for more information. | |
869 | ||
870 | GENERATE_DOCSET = NO | |
871 | ||
872 | # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the | |
873 | # feed. A documentation feed provides an umbrella under which multiple | |
874 | # documentation sets from a single provider (such as a company or product suite) | |
875 | # can be grouped. | |
876 | ||
877 | DOCSET_FEEDNAME = "Doxygen generated docs" | |
878 | ||
879 | # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that | |
880 | # should uniquely identify the documentation set bundle. This should be a | |
881 | # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen | |
882 | # will append .docset to the name. | |
883 | ||
884 | DOCSET_BUNDLE_ID = org.doxygen.Project | |
885 | ||
886 | # When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify | |
887 | # the documentation publisher. This should be a reverse domain-name style | |
888 | # string, e.g. com.mycompany.MyDocSet.documentation. | |
889 | ||
890 | DOCSET_PUBLISHER_ID = org.doxygen.Publisher | |
891 | ||
892 | # The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. | |
893 | ||
894 | DOCSET_PUBLISHER_NAME = Publisher | |
895 | ||
896 | # If the GENERATE_HTMLHELP tag is set to YES, additional index files | |
897 | # will be generated that can be used as input for tools like the | |
898 | # Microsoft HTML help workshop to generate a compiled HTML help file (.chm) | |
899 | # of the generated HTML documentation. | |
900 | ||
901 | GENERATE_HTMLHELP = NO | |
902 | ||
903 | # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can | |
904 | # be used to specify the file name of the resulting .chm file. You | |
905 | # can add a path in front of the file if the result should not be | |
906 | # written to the html output directory. | |
907 | ||
908 | CHM_FILE = | |
909 | ||
910 | # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can | |
911 | # be used to specify the location (absolute path including file name) of | |
912 | # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run | |
913 | # the HTML help compiler on the generated index.hhp. | |
914 | ||
915 | HHC_LOCATION = | |
916 | ||
917 | # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag | |
918 | # controls if a separate .chi index file is generated (YES) or that | |
919 | # it should be included in the master .chm file (NO). | |
920 | ||
921 | GENERATE_CHI = NO | |
922 | ||
923 | # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING | |
924 | # is used to encode HtmlHelp index (hhk), content (hhc) and project file | |
925 | # content. | |
926 | ||
927 | CHM_INDEX_ENCODING = | |
928 | ||
929 | # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag | |
930 | # controls whether a binary table of contents is generated (YES) or a | |
931 | # normal table of contents (NO) in the .chm file. | |
932 | ||
933 | BINARY_TOC = NO | |
934 | ||
935 | # The TOC_EXPAND flag can be set to YES to add extra items for group members | |
936 | # to the contents of the HTML help documentation and to the tree view. | |
937 | ||
938 | TOC_EXPAND = NO | |
939 | ||
940 | # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and | |
941 | # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated | |
942 | # that can be used as input for Qt's qhelpgenerator to generate a | |
943 | # Qt Compressed Help (.qch) of the generated HTML documentation. | |
944 | ||
945 | GENERATE_QHP = NO | |
946 | ||
947 | # If the QHG_LOCATION tag is specified, the QCH_FILE tag can | |
948 | # be used to specify the file name of the resulting .qch file. | |
949 | # The path specified is relative to the HTML output folder. | |
950 | ||
951 | QCH_FILE = | |
952 | ||
953 | # The QHP_NAMESPACE tag specifies the namespace to use when generating | |
954 | # Qt Help Project output. For more information please see | |
955 | # http://doc.trolltech.com/qthelpproject.html#namespace | |
956 | ||
957 | QHP_NAMESPACE = org.doxygen.Project | |
958 | ||
959 | # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating | |
960 | # Qt Help Project output. For more information please see | |
961 | # http://doc.trolltech.com/qthelpproject.html#virtual-folders | |
962 | ||
963 | QHP_VIRTUAL_FOLDER = doc | |
964 | ||
965 | # If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to | |
966 | # add. For more information please see | |
967 | # http://doc.trolltech.com/qthelpproject.html#custom-filters | |
968 | ||
969 | QHP_CUST_FILTER_NAME = | |
970 | ||
971 | # The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the | |
972 | # custom filter to add. For more information please see | |
973 | # <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters"> | |
974 | # Qt Help Project / Custom Filters</a>. | |
975 | ||
976 | QHP_CUST_FILTER_ATTRS = | |
977 | ||
978 | # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this | |
979 | # project's | |
980 | # filter section matches. | |
981 | # <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes"> | |
982 | # Qt Help Project / Filter Attributes</a>. | |
983 | ||
984 | QHP_SECT_FILTER_ATTRS = | |
985 | ||
986 | # If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can | |
987 | # be used to specify the location of Qt's qhelpgenerator. | |
988 | # If non-empty doxygen will try to run qhelpgenerator on the generated | |
989 | # .qhp file. | |
990 | ||
991 | QHG_LOCATION = | |
992 | ||
993 | # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files | |
994 | # will be generated, which together with the HTML files, form an Eclipse help | |
995 | # plugin. To install this plugin and make it available under the help contents | |
996 | # menu in Eclipse, the contents of the directory containing the HTML and XML | |
997 | # files needs to be copied into the plugins directory of eclipse. The name of | |
998 | # the directory within the plugins directory should be the same as | |
999 | # the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before | |
1000 | # the help appears. | |
1001 | ||
1002 | GENERATE_ECLIPSEHELP = NO | |
1003 | ||
1004 | # A unique identifier for the eclipse help plugin. When installing the plugin | |
1005 | # the directory name containing the HTML and XML files should also have | |
1006 | # this name. | |
1007 | ||
1008 | ECLIPSE_DOC_ID = org.doxygen.Project | |
1009 | ||
1010 | # The DISABLE_INDEX tag can be used to turn on/off the condensed index at | |
1011 | # top of each HTML page. The value NO (the default) enables the index and | |
1012 | # the value YES disables it. | |
1013 | ||
1014 | DISABLE_INDEX = NO | |
1015 | ||
1016 | # This tag can be used to set the number of enum values (range [1..20]) | |
1017 | # that doxygen will group on one line in the generated HTML documentation. | |
1018 | ||
1019 | ENUM_VALUES_PER_LINE = 1 | |
1020 | ||
1021 | # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index | |
1022 | # structure should be generated to display hierarchical information. | |
1023 | # If the tag value is set to YES, a side panel will be generated | |
1024 | # containing a tree-like index structure (just like the one that | |
1025 | # is generated for HTML Help). For this to work a browser that supports | |
1026 | # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). | |
1027 | # Windows users are probably better off using the HTML help feature. | |
1028 | ||
1029 | GENERATE_TREEVIEW = NO | |
1030 | ||
1031 | # By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, | |
1032 | # and Class Hierarchy pages using a tree view instead of an ordered list. | |
1033 | ||
1034 | USE_INLINE_TREES = NO | |
1035 | ||
1036 | # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be | |
1037 | # used to set the initial width (in pixels) of the frame in which the tree | |
1038 | # is shown. | |
1039 | ||
1040 | TREEVIEW_WIDTH = 250 | |
1041 | ||
1042 | # When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open | |
1043 | # links to external symbols imported via tag files in a separate window. | |
1044 | ||
1045 | EXT_LINKS_IN_WINDOW = NO | |
1046 | ||
1047 | # Use this tag to change the font size of Latex formulas included | |
1048 | # as images in the HTML documentation. The default is 10. Note that | |
1049 | # when you change the font size after a successful doxygen run you need | |
1050 | # to manually remove any form_*.png images from the HTML output directory | |
1051 | # to force them to be regenerated. | |
1052 | ||
1053 | FORMULA_FONTSIZE = 10 | |
1054 | ||
1055 | # Use the FORMULA_TRANPARENT tag to determine whether or not the images | |
1056 | # generated for formulas are transparent PNGs. Transparent PNGs are | |
1057 | # not supported properly for IE 6.0, but are supported on all modern browsers. | |
1058 | # Note that when changing this option you need to delete any form_*.png files | |
1059 | # in the HTML output before the changes have effect. | |
1060 | ||
1061 | FORMULA_TRANSPARENT = YES | |
1062 | ||
1063 | # When the SEARCHENGINE tag is enabled doxygen will generate a search box | |
1064 | # for the HTML output. The underlying search engine uses javascript | |
1065 | # and DHTML and should work on any modern browser. Note that when using | |
1066 | # HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets | |
1067 | # (GENERATE_DOCSET) there is already a search function so this one should | |
1068 | # typically be disabled. For large projects the javascript based search engine | |
1069 | # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. | |
1070 | ||
1071 | SEARCHENGINE = NO | |
1072 | ||
1073 | # When the SERVER_BASED_SEARCH tag is enabled the search engine will be | |
1074 | # implemented using a PHP enabled web server instead of at the web client | |
1075 | # using Javascript. Doxygen will generate the search PHP script and index | |
1076 | # file to put on the web server. The advantage of the server | |
1077 | # based approach is that it scales better to large projects and allows | |
1078 | # full text search. The disadvances is that it is more difficult to setup | |
1079 | # and does not have live searching capabilities. | |
1080 | ||
1081 | SERVER_BASED_SEARCH = NO | |
1082 | ||
1083 | #--------------------------------------------------------------------------- | |
1084 | # configuration options related to the LaTeX output | |
1085 | #--------------------------------------------------------------------------- | |
1086 | ||
1087 | # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will | |
1088 | # generate Latex output. | |
1089 | ||
1090 | GENERATE_LATEX = NO | |
1091 | ||
1092 | # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. | |
1093 | # If a relative path is entered the value of OUTPUT_DIRECTORY will be | |
1094 | # put in front of it. If left blank `latex' will be used as the default path. | |
1095 | ||
1096 | LATEX_OUTPUT = latex | |
1097 | ||
1098 | # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be | |
1099 | # invoked. If left blank `latex' will be used as the default command name. | |
1100 | # Note that when enabling USE_PDFLATEX this option is only used for | |
1101 | # generating bitmaps for formulas in the HTML output, but not in the | |
1102 | # Makefile that is written to the output directory. | |
1103 | ||
1104 | LATEX_CMD_NAME = latex | |
1105 | ||
1106 | # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to | |
1107 | # generate index for LaTeX. If left blank `makeindex' will be used as the | |
1108 | # default command name. | |
1109 | ||
1110 | MAKEINDEX_CMD_NAME = makeindex | |
1111 | ||
1112 | # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact | |
1113 | # LaTeX documents. This may be useful for small projects and may help to | |
1114 | # save some trees in general. | |
1115 | ||
1116 | COMPACT_LATEX = YES | |
1117 | ||
1118 | # The PAPER_TYPE tag can be used to set the paper type that is used | |
1119 | # by the printer. Possible values are: a4, a4wide, letter, legal and | |
1120 | # executive. If left blank a4wide will be used. | |
1121 | ||
1122 | PAPER_TYPE = a4wide | |
1123 | ||
1124 | # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX | |
1125 | # packages that should be included in the LaTeX output. | |
1126 | ||
1127 | EXTRA_PACKAGES = | |
1128 | ||
1129 | # The LATEX_HEADER tag can be used to specify a personal LaTeX header for | |
1130 | # the generated latex document. The header should contain everything until | |
1131 | # the first chapter. If it is left blank doxygen will generate a | |
1132 | # standard header. Notice: only use this tag if you know what you are doing! | |
1133 | ||
1134 | LATEX_HEADER = | |
1135 | ||
1136 | # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated | |
1137 | # is prepared for conversion to pdf (using ps2pdf). The pdf file will | |
1138 | # contain links (just like the HTML output) instead of page references | |
1139 | # This makes the output suitable for online browsing using a pdf viewer. | |
1140 | ||
1141 | PDF_HYPERLINKS = YES | |
1142 | ||
1143 | # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of | |
1144 | # plain latex in the generated Makefile. Set this option to YES to get a | |
1145 | # higher quality PDF documentation. | |
1146 | ||
1147 | USE_PDFLATEX = YES | |
1148 | ||
1149 | # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. | |
1150 | # command to the generated LaTeX files. This will instruct LaTeX to keep | |
1151 | # running if errors occur, instead of asking the user for help. | |
1152 | # This option is also used when generating formulas in HTML. | |
1153 | ||
1154 | LATEX_BATCHMODE = YES | |
1155 | ||
1156 | # If LATEX_HIDE_INDICES is set to YES then doxygen will not | |
1157 | # include the index chapters (such as File Index, Compound Index, etc.) | |
1158 | # in the output. | |
1159 | ||
1160 | LATEX_HIDE_INDICES = YES | |
1161 | ||
1162 | # If LATEX_SOURCE_CODE is set to YES then doxygen will include | |
1163 | # source code with syntax highlighting in the LaTeX output. | |
1164 | # Note that which sources are shown also depends on other settings | |
1165 | # such as SOURCE_BROWSER. | |
1166 | ||
1167 | LATEX_SOURCE_CODE = NO | |
1168 | ||
1169 | #--------------------------------------------------------------------------- | |
1170 | # configuration options related to the RTF output | |
1171 | #--------------------------------------------------------------------------- | |
1172 | ||
1173 | # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output | |
1174 | # The RTF output is optimized for Word 97 and may not look very pretty with | |
1175 | # other RTF readers or editors. | |
1176 | ||
1177 | GENERATE_RTF = NO | |
1178 | ||
1179 | # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. | |
1180 | # If a relative path is entered the value of OUTPUT_DIRECTORY will be | |
1181 | # put in front of it. If left blank `rtf' will be used as the default path. | |
1182 | ||
1183 | RTF_OUTPUT = rtf | |
1184 | ||
1185 | # If the COMPACT_RTF tag is set to YES Doxygen generates more compact | |
1186 | # RTF documents. This may be useful for small projects and may help to | |
1187 | # save some trees in general. | |
1188 | ||
1189 | COMPACT_RTF = NO | |
1190 | ||
1191 | # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated | |
1192 | # will contain hyperlink fields. The RTF file will | |
1193 | # contain links (just like the HTML output) instead of page references. | |
1194 | # This makes the output suitable for online browsing using WORD or other | |
1195 | # programs which support those fields. | |
1196 | # Note: wordpad (write) and others do not support links. | |
1197 | ||
1198 | RTF_HYPERLINKS = NO | |
1199 | ||
1200 | # Load stylesheet definitions from file. Syntax is similar to doxygen's | |
1201 | # config file, i.e. a series of assignments. You only have to provide | |
1202 | # replacements, missing definitions are set to their default value. | |
1203 | ||
1204 | RTF_STYLESHEET_FILE = | |
1205 | ||
1206 | # Set optional variables used in the generation of an rtf document. | |
1207 | # Syntax is similar to doxygen's config file. | |
1208 | ||
1209 | RTF_EXTENSIONS_FILE = | |
1210 | ||
1211 | #--------------------------------------------------------------------------- | |
1212 | # configuration options related to the man page output | |
1213 | #--------------------------------------------------------------------------- | |
1214 | ||
1215 | # If the GENERATE_MAN tag is set to YES (the default) Doxygen will | |
1216 | # generate man pages | |
1217 | ||
1218 | GENERATE_MAN = NO | |
1219 | ||
1220 | # The MAN_OUTPUT tag is used to specify where the man pages will be put. | |
1221 | # If a relative path is entered the value of OUTPUT_DIRECTORY will be | |
1222 | # put in front of it. If left blank `man' will be used as the default path. | |
1223 | ||
1224 | MAN_OUTPUT = dox/man | |
1225 | ||
1226 | # The MAN_EXTENSION tag determines the extension that is added to | |
1227 | # the generated man pages (default is the subroutine's section .3) | |
1228 | ||
1229 | MAN_EXTENSION = .3 | |
1230 | ||
1231 | # If the MAN_LINKS tag is set to YES and Doxygen generates man output, | |
1232 | # then it will generate one additional man file for each entity | |
1233 | # documented in the real man page(s). These additional files | |
1234 | # only source the real man page, but without them the man command | |
1235 | # would be unable to find the correct page. The default is NO. | |
1236 | ||
1237 | MAN_LINKS = YES | |
1238 | ||
1239 | #--------------------------------------------------------------------------- | |
1240 | # configuration options related to the XML output | |
1241 | #--------------------------------------------------------------------------- | |
1242 | ||
1243 | # If the GENERATE_XML tag is set to YES Doxygen will | |
1244 | # generate an XML file that captures the structure of | |
1245 | # the code including all documentation. | |
1246 | ||
1247 | GENERATE_XML = NO | |
1248 | ||
1249 | # The XML_OUTPUT tag is used to specify where the XML pages will be put. | |
1250 | # If a relative path is entered the value of OUTPUT_DIRECTORY will be | |
1251 | # put in front of it. If left blank `xml' will be used as the default path. | |
1252 | ||
1253 | XML_OUTPUT = xml | |
1254 | ||
1255 | # The XML_SCHEMA tag can be used to specify an XML schema, | |
1256 | # which can be used by a validating XML parser to check the | |
1257 | # syntax of the XML files. | |
1258 | ||
1259 | XML_SCHEMA = | |
1260 | ||
1261 | # The XML_DTD tag can be used to specify an XML DTD, | |
1262 | # which can be used by a validating XML parser to check the | |
1263 | # syntax of the XML files. | |
1264 | ||
1265 | XML_DTD = | |
1266 | ||
1267 | # If the XML_PROGRAMLISTING tag is set to YES Doxygen will | |
1268 | # dump the program listings (including syntax highlighting | |
1269 | # and cross-referencing information) to the XML output. Note that | |
1270 | # enabling this will significantly increase the size of the XML output. | |
1271 | ||
1272 | XML_PROGRAMLISTING = YES | |
1273 | ||
1274 | #--------------------------------------------------------------------------- | |
1275 | # configuration options for the AutoGen Definitions output | |
1276 | #--------------------------------------------------------------------------- | |
1277 | ||
1278 | # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will | |
1279 | # generate an AutoGen Definitions (see autogen.sf.net) file | |
1280 | # that captures the structure of the code including all | |
1281 | # documentation. Note that this feature is still experimental | |
1282 | # and incomplete at the moment. | |
1283 | ||
1284 | GENERATE_AUTOGEN_DEF = NO | |
1285 | ||
1286 | #--------------------------------------------------------------------------- | |
1287 | # configuration options related to the Perl module output | |
1288 | #--------------------------------------------------------------------------- | |
1289 | ||
1290 | # If the GENERATE_PERLMOD tag is set to YES Doxygen will | |
1291 | # generate a Perl module file that captures the structure of | |
1292 | # the code including all documentation. Note that this | |
1293 | # feature is still experimental and incomplete at the | |
1294 | # moment. | |
1295 | ||
1296 | GENERATE_PERLMOD = NO | |
1297 | ||
1298 | # If the PERLMOD_LATEX tag is set to YES Doxygen will generate | |
1299 | # the necessary Makefile rules, Perl scripts and LaTeX code to be able | |
1300 | # to generate PDF and DVI output from the Perl module output. | |
1301 | ||
1302 | PERLMOD_LATEX = NO | |
1303 | ||
1304 | # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be | |
1305 | # nicely formatted so it can be parsed by a human reader. | |
1306 | # This is useful | |
1307 | # if you want to understand what is going on. | |
1308 | # On the other hand, if this | |
1309 | # tag is set to NO the size of the Perl module output will be much smaller | |
1310 | # and Perl will parse it just the same. | |
1311 | ||
1312 | PERLMOD_PRETTY = YES | |
1313 | ||
1314 | # The names of the make variables in the generated doxyrules.make file | |
1315 | # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. | |
1316 | # This is useful so different doxyrules.make files included by the same | |
1317 | # Makefile don't overwrite each other's variables. | |
1318 | ||
1319 | PERLMOD_MAKEVAR_PREFIX = | |
1320 | ||
1321 | #--------------------------------------------------------------------------- | |
1322 | # Configuration options related to the preprocessor | |
1323 | #--------------------------------------------------------------------------- | |
1324 | ||
1325 | # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will | |
1326 | # evaluate all C-preprocessor directives found in the sources and include | |
1327 | # files. | |
1328 | ||
1329 | ENABLE_PREPROCESSING = YES | |
1330 | ||
1331 | # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro | |
1332 | # names in the source code. If set to NO (the default) only conditional | |
1333 | # compilation will be performed. Macro expansion can be done in a controlled | |
1334 | # way by setting EXPAND_ONLY_PREDEF to YES. | |
1335 | ||
1336 | MACRO_EXPANSION = YES | |
1337 | ||
1338 | # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES | |
1339 | # then the macro expansion is limited to the macros specified with the | |
1340 | # PREDEFINED and EXPAND_AS_DEFINED tags. | |
1341 | ||
1342 | EXPAND_ONLY_PREDEF = YES | |
1343 | ||
1344 | # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files | |
1345 | # in the INCLUDE_PATH (see below) will be search if a #include is found. | |
1346 | ||
1347 | SEARCH_INCLUDES = NO | |
1348 | ||
1349 | # The INCLUDE_PATH tag can be used to specify one or more directories that | |
1350 | # contain include files that are not input files but should be processed by | |
1351 | # the preprocessor. | |
1352 | ||
1353 | INCLUDE_PATH = | |
1354 | ||
1355 | # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard | |
1356 | # patterns (like *.h and *.hpp) to filter out the header-files in the | |
1357 | # directories. If left blank, the patterns specified with FILE_PATTERNS will | |
1358 | # be used. | |
1359 | ||
1360 | INCLUDE_FILE_PATTERNS = | |
1361 | ||
1362 | # The PREDEFINED tag can be used to specify one or more macro names that | |
1363 | # are defined before the preprocessor is started (similar to the -D option of | |
1364 | # gcc). The argument of the tag is a list of macros of the form: name | |
1365 | # or name=definition (no spaces). If the definition and the = are | |
1366 | # omitted =1 is assumed. To prevent a macro definition from being | |
1367 | # undefined via #undef or recursively expanded use the := operator | |
1368 | # instead of the = operator. | |
1369 | ||
1370 | PREDEFINED = __doxygen_mode__ | |
1371 | ||
1372 | # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then | |
1373 | # this tag can be used to specify a list of macro names that should be expanded. | |
1374 | # The macro definition that is found in the sources will be used. | |
1375 | # Use the PREDEFINED tag if you want to use a different macro definition. | |
1376 | ||
1377 | EXPAND_AS_DEFINED = | |
1378 | ||
1379 | # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then | |
1380 | # doxygen's preprocessor will remove all function-like macros that are alone | |
1381 | # on a line, have an all uppercase name, and do not end with a semicolon. Such | |
1382 | # function macros are typically used for boiler-plate code, and will confuse | |
1383 | # the parser if not removed. | |
1384 | ||
1385 | SKIP_FUNCTION_MACROS = YES | |
1386 | ||
1387 | #--------------------------------------------------------------------------- | |
1388 | # Configuration::additions related to external references | |
1389 | #--------------------------------------------------------------------------- | |
1390 | ||
1391 | # The TAGFILES option can be used to specify one or more tagfiles. | |
1392 | # Optionally an initial location of the external documentation | |
1393 | # can be added for each tagfile. The format of a tag file without | |
1394 | # this location is as follows: | |
1395 | # | |
1396 | # TAGFILES = file1 file2 ... | |
1397 | # Adding location for the tag files is done as follows: | |
1398 | # | |
1399 | # TAGFILES = file1=loc1 "file2 = loc2" ... | |
1400 | # where "loc1" and "loc2" can be relative or absolute paths or | |
1401 | # URLs. If a location is present for each tag, the installdox tool | |
1402 | # does not have to be run to correct the links. | |
1403 | # Note that each tag file must have a unique name | |
1404 | # (where the name does NOT include the path) | |
1405 | # If a tag file is not located in the directory in which doxygen | |
1406 | # is run, you must also specify the path to the tagfile here. | |
1407 | ||
1408 | TAGFILES = | |
1409 | ||
1410 | # When a file name is specified after GENERATE_TAGFILE, doxygen will create | |
1411 | # a tag file that is based on the input files it reads. | |
1412 | ||
1413 | GENERATE_TAGFILE = | |
1414 | ||
1415 | # If the ALLEXTERNALS tag is set to YES all external classes will be listed | |
1416 | # in the class index. If set to NO only the inherited external classes | |
1417 | # will be listed. | |
1418 | ||
1419 | ALLEXTERNALS = NO | |
1420 | ||
1421 | # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed | |
1422 | # in the modules index. If set to NO, only the current project's groups will | |
1423 | # be listed. | |
1424 | ||
1425 | EXTERNAL_GROUPS = YES | |
1426 | ||
1427 | # The PERL_PATH should be the absolute path and name of the perl script | |
1428 | # interpreter (i.e. the result of `which perl'). | |
1429 | ||
1430 | PERL_PATH = /usr/bin/perl | |
1431 | ||
1432 | #--------------------------------------------------------------------------- | |
1433 | # Configuration options related to the dot tool | |
1434 | #--------------------------------------------------------------------------- | |
1435 | ||
1436 | # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will | |
1437 | # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base | |
1438 | # or super classes. Setting the tag to NO turns the diagrams off. Note that | |
1439 | # this option is superseded by the HAVE_DOT option below. This is only a | |
1440 | # fallback. It is recommended to install and use dot, since it yields more | |
1441 | # powerful graphs. | |
1442 | ||
1443 | CLASS_DIAGRAMS = YES | |
1444 | ||
1445 | # You can define message sequence charts within doxygen comments using the \msc | |
1446 | # command. Doxygen will then run the mscgen tool (see | |
1447 | # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the | |
1448 | # documentation. The MSCGEN_PATH tag allows you to specify the directory where | |
1449 | # the mscgen tool resides. If left empty the tool is assumed to be found in the | |
1450 | # default search path. | |
1451 | ||
1452 | MSCGEN_PATH = | |
1453 | ||
1454 | # If set to YES, the inheritance and collaboration graphs will hide | |
1455 | # inheritance and usage relations if the target is undocumented | |
1456 | # or is not a class. | |
1457 | ||
1458 | HIDE_UNDOC_RELATIONS = YES | |
1459 | ||
1460 | # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is | |
1461 | # available from the path. This tool is part of Graphviz, a graph visualization | |
1462 | # toolkit from AT&T and Lucent Bell Labs. The other options in this section | |
1463 | # have no effect if this option is set to NO (the default) | |
1464 | ||
1465 | HAVE_DOT = YES | |
1466 | ||
1467 | # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is | |
1468 | # allowed to run in parallel. When set to 0 (the default) doxygen will | |
1469 | # base this on the number of processors available in the system. You can set it | |
1470 | # explicitly to a value larger than 0 to get control over the balance | |
1471 | # between CPU load and processing speed. | |
1472 | ||
1473 | DOT_NUM_THREADS = 0 | |
1474 | ||
1475 | # By default doxygen will write a font called FreeSans.ttf to the output | |
1476 | # directory and reference it in all dot files that doxygen generates. This | |
1477 | # font does not include all possible unicode characters however, so when you need | |
1478 | # these (or just want a differently looking font) you can specify the font name | |
1479 | # using DOT_FONTNAME. You need need to make sure dot is able to find the font, | |
1480 | # which can be done by putting it in a standard location or by setting the | |
1481 | # DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory | |
1482 | # containing the font. | |
1483 | ||
1484 | DOT_FONTNAME = FreeSans.ttf | |
1485 | ||
1486 | # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. | |
1487 | # The default size is 10pt. | |
1488 | ||
1489 | DOT_FONTSIZE = 10 | |
1490 | ||
1491 | # By default doxygen will tell dot to use the output directory to look for the | |
1492 | # FreeSans.ttf font (which doxygen will put there itself). If you specify a | |
1493 | # different font using DOT_FONTNAME you can set the path where dot | |
1494 | # can find it using this tag. | |
1495 | ||
1496 | DOT_FONTPATH = | |
1497 | ||
1498 | # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen | |
1499 | # will generate a graph for each documented class showing the direct and | |
1500 | # indirect inheritance relations. Setting this tag to YES will force the | |
1501 | # the CLASS_DIAGRAMS tag to NO. | |
1502 | ||
1503 | CLASS_GRAPH = YES | |
1504 | ||
1505 | # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen | |
1506 | # will generate a graph for each documented class showing the direct and | |
1507 | # indirect implementation dependencies (inheritance, containment, and | |
1508 | # class references variables) of the class with other documented classes. | |
1509 | ||
1510 | COLLABORATION_GRAPH = YES | |
1511 | ||
1512 | # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen | |
1513 | # will generate a graph for groups, showing the direct groups dependencies | |
1514 | ||
1515 | GROUP_GRAPHS = YES | |
1516 | ||
1517 | # If the UML_LOOK tag is set to YES doxygen will generate inheritance and | |
1518 | # collaboration diagrams in a style similar to the OMG's Unified Modeling | |
1519 | # Language. | |
1520 | ||
1521 | UML_LOOK = NO | |
1522 | ||
1523 | # If set to YES, the inheritance and collaboration graphs will show the | |
1524 | # relations between templates and their instances. | |
1525 | ||
1526 | TEMPLATE_RELATIONS = YES | |
1527 | ||
1528 | # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT | |
1529 | # tags are set to YES then doxygen will generate a graph for each documented | |
1530 | # file showing the direct and indirect include dependencies of the file with | |
1531 | # other documented files. | |
1532 | ||
1533 | INCLUDE_GRAPH = YES | |
1534 | ||
1535 | # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and | |
1536 | # HAVE_DOT tags are set to YES then doxygen will generate a graph for each | |
1537 | # documented header file showing the documented files that directly or | |
1538 | # indirectly include this file. | |
1539 | ||
1540 | INCLUDED_BY_GRAPH = YES | |
1541 | ||
1542 | # If the CALL_GRAPH and HAVE_DOT options are set to YES then | |
1543 | # doxygen will generate a call dependency graph for every global function | |
1544 | # or class method. Note that enabling this option will significantly increase | |
1545 | # the time of a run. So in most cases it will be better to enable call graphs | |
1546 | # for selected functions only using the \callgraph command. | |
1547 | ||
1548 | CALL_GRAPH = NO | |
1549 | ||
1550 | # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then | |
1551 | # doxygen will generate a caller dependency graph for every global function | |
1552 | # or class method. Note that enabling this option will significantly increase | |
1553 | # the time of a run. So in most cases it will be better to enable caller | |
1554 | # graphs for selected functions only using the \callergraph command. | |
1555 | ||
1556 | CALLER_GRAPH = NO | |
1557 | ||
1558 | # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen | |
1559 | # will graphical hierarchy of all classes instead of a textual one. | |
1560 | ||
1561 | GRAPHICAL_HIERARCHY = YES | |
1562 | ||
1563 | # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES | |
1564 | # then doxygen will show the dependencies a directory has on other directories | |
1565 | # in a graphical way. The dependency relations are determined by the #include | |
1566 | # relations between the files in the directories. | |
1567 | ||
1568 | DIRECTORY_GRAPH = YES | |
1569 | ||
1570 | # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images | |
1571 | # generated by dot. Possible values are png, jpg, or gif | |
1572 | # If left blank png will be used. | |
1573 | ||
1574 | DOT_IMAGE_FORMAT = png | |
1575 | ||
1576 | # The tag DOT_PATH can be used to specify the path where the dot tool can be | |
1577 | # found. If left blank, it is assumed the dot tool can be found in the path. | |
1578 | ||
1579 | DOT_PATH = | |
1580 | ||
1581 | # The DOTFILE_DIRS tag can be used to specify one or more directories that | |
1582 | # contain dot files that are included in the documentation (see the | |
1583 | # \dotfile command). | |
1584 | ||
1585 | DOTFILE_DIRS = . | |
1586 | ||
1587 | # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of | |
1588 | # nodes that will be shown in the graph. If the number of nodes in a graph | |
1589 | # becomes larger than this value, doxygen will truncate the graph, which is | |
1590 | # visualized by representing a node as a red box. Note that doxygen if the | |
1591 | # number of direct children of the root node in a graph is already larger than | |
1592 | # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note | |
1593 | # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. | |
1594 | ||
1595 | DOT_GRAPH_MAX_NODES = 50 | |
1596 | ||
1597 | # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the | |
1598 | # graphs generated by dot. A depth value of 3 means that only nodes reachable | |
1599 | # from the root by following a path via at most 3 edges will be shown. Nodes | |
1600 | # that lay further from the root node will be omitted. Note that setting this | |
1601 | # option to 1 or 2 may greatly reduce the computation time needed for large | |
1602 | # code bases. Also note that the size of a graph can be further restricted by | |
1603 | # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. | |
1604 | ||
1605 | MAX_DOT_GRAPH_DEPTH = 0 | |
1606 | ||
1607 | # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent | |
1608 | # background. This is disabled by default, because dot on Windows does not | |
1609 | # seem to support this out of the box. Warning: Depending on the platform used, | |
1610 | # enabling this option may lead to badly anti-aliased labels on the edges of | |
1611 | # a graph (i.e. they become hard to read). | |
1612 | ||
1613 | DOT_TRANSPARENT = NO | |
1614 | ||
1615 | # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output | |
1616 | # files in one run (i.e. multiple -o and -T options on the command line). This | |
1617 | # makes dot run faster, but since only newer versions of dot (>1.8.10) | |
1618 | # support this, this feature is disabled by default. | |
1619 | ||
1620 | DOT_MULTI_TARGETS = NO | |
1621 | ||
1622 | # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will | |
1623 | # generate a legend page explaining the meaning of the various boxes and | |
1624 | # arrows in the dot generated graphs. | |
1625 | ||
1626 | GENERATE_LEGEND = YES | |
1627 | ||
1628 | # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will | |
1629 | # remove the intermediate dot files that are used to generate | |
1630 | # the various graphs. | |
1631 | ||
1632 | DOT_CLEANUP = YES |